To use the Lookah Seahorse Pro Plus, press the power button five times to turn it on, press twice to pick a voltage (blue 3.2V, purple 3.6V or white 4.1V), then press and hold to heat the quartz tip and touch it to your concentrate. Press three times for session mode, which preheats for 15 seconds and then holds heat for 30 seconds.
Key takeaways
- Five presses for on and off, two to change voltage, three for session mode.
- The light color shows the voltage: blue 3.2V, purple 3.6V, white 4.1V.
- The Pro Plus ships with a Type V quartz coil and adds USB-C and a magnetic tip cap over the original Seahorse Pro.
- Run one extra heat cycle after each session to keep the coil clean.
What are the Seahorse Pro Plus specs?
According to Lookah, the Seahorse Pro Plus has a 650mAh battery, three voltage settings, session and manual modes, a 15-second preheat, USB-C charging with pass-through, and a Type V quartz tip coil.
| Spec | Seahorse Pro Plus |
|---|---|
| Battery | 650mAh |
| Voltage | 3.2V (blue), 3.6V (purple), 4.1V (white) |
| Modes | Manual and session |
| Preheat | 15 seconds in session mode |
| Charging | USB-C, pass-through, 250mA charging current |
| Input voltage | 4.5V to 5.5V |
| Coil | Type V Seahorse quartz tip coil |
How do you use the Lookah Seahorse Pro Plus?
Turn it on, choose a voltage, then heat the tip and touch it to the edge of your concentrate as you inhale. Use manual mode for control or session mode for hands-free heat.
How to use the Lookah Seahorse Pro Plus, based on Lookah’s instructions.
Total time: 2 minutes
-
Turn it on
Press the power button five times quickly.
-
Pick a voltage
Press the button twice to cycle the settings. Blue is 3.2V, purple is 3.6V and white is 4.1V.
-
Heat the tip (manual mode)
Press and hold the power button to heat the quartz tip for a few seconds.
-
Touch, do not dip
While inhaling, run the tip along the edge of your concentrate. Do not plunge it in.
-
Or use session mode
Press the button three times. It preheats for 15 seconds, shown by a flashing light, then holds heat for 30 seconds.
-
Turn it off
Press the power button five times when you are done.
Pocket-size dabbing
Get the Seahorse Pro Plus
650mAh, three voltages, session mode and a Type V quartz coil. Free US shipping over $49.99.
What do the Seahorse Pro Plus light colors mean?
The light around the button shows your voltage. Blue is the lowest at 3.2V, purple is 3.6V and white is the highest at 4.1V.
Start on blue for the most flavor and the gentlest heat. Move up to purple or white if you want more vapor or are using thicker concentrate. If the taste turns harsh, step back down.
What is the difference between manual and session mode?
Manual mode heats only while you hold the button. Session mode heats for you: three presses start a 15-second preheat, then the tip holds temperature for 30 seconds so you do not have to keep pressing.
| Mode | How to start | Best for |
|---|---|---|
| Manual | Press and hold | Short, controlled hits |
| Session | Press three times | Hands-free dabs, longer draws |
Can you use the Seahorse Pro Plus with a water pipe?
Yes. The kit includes a 14/18mm water pipe adapter and a silicone hose. Place the adapter in your pipe’s downstem and connect the hose to the Seahorse mouthpiece.
Lookah also sells a glass bubbler accessory pack that replaces the mouthpiece for cooler, water-filtered hits, and a stand for the device. Both are sold separately.
What coils does the Seahorse Pro Plus use?
It ships with a Type V Seahorse quartz tip coil. Lookah lists five Seahorse coil types, from the Type I quartz coil used on the original Pro to the Type V on the Pro Plus.
- Type I: quartz coil used on the original Seahorse Pro.
- Type III: ceramic tube coil that heats 360 degrees, used on the Seahorse 2.0.
- Type V: quartz tip coil supplied with the Pro Plus.
- Types II and IV: also sold by Lookah. Check Lookah’s compatibility notes before swapping.
What is the difference between the Seahorse Pro and Pro Plus?
They look the same, but Lookah upgraded the Pro Plus with a USB-C port in place of Micro-USB, a magnetic tip cap and the newer Type V quartz coil in place of the Type I coil.
Electric and easy
Shop Lookah
The full Seahorse line, from the 2.0 to the King and Queen. 100% Authentic from top brand names.
How do you clean the Seahorse Pro Plus?
After each use, run one extra heat cycle to burn off residue on the coil, then brush the tip and airway. Keep the magnetic cover on the tip between sessions.
- Run one extra heat cycle with no concentrate to clear the coil.
- Let the tip cool, then brush away residue with the included cleaning brush.
- Wipe the mouthpiece and airway with a cotton swab.
- Replace the magnetic tip cover.
- Swap in a new coil when flavor fades or the tip stays dirty after cleaning.
Why is my Seahorse Pro Plus not working?
Most problems come from a low battery, a loose coil or a dirty tip. Work through these checks before assuming the device is faulty.
- Will not turn on: make sure you pressed the button five times quickly, then charge it fully and try again.
- Weak or no vapor: raise the voltage one step, give the tip a few more seconds to heat and check that the coil is screwed on snugly.
- Burnt taste: drop to a lower voltage and avoid holding a hot tip against concentrate for too long.
- Tip will not heat: unscrew the coil, wipe the threads with a dry cotton swab and reattach it. If it still does not heat, replace the coil.
- Clogged airflow: clean residue from the tip and mouthpiece with a cotton swab and isopropyl alcohol, then let everything dry fully before use.
If none of these fix it, contact the seller with your order details.
Shop Lookah vaporizers we carry
In stock now and ready to ship. Free US shipping over $49.99.
Frequently asked questions
How do you turn on the Lookah Seahorse Pro Plus?
Press the power button five times quickly to turn it on, and five times again to turn it off. Once it is on, press twice to change the voltage and three times to start session mode. The light color around the button shows which voltage setting you are on.
What do the colors mean on the Seahorse Pro Plus?
The light shows the voltage. Blue is 3.2V, the lowest and most flavorful setting. Purple is 3.6V for a balance of flavor and vapor. White is 4.1V, the highest setting for bigger hits. Press the button twice to cycle between them.
How long does session mode last on the Seahorse Pro Plus?
According to Lookah, session mode starts with a 15-second preheat, shown by a flashing light, then holds the temperature for 30 seconds. That gives you time for a full dab without holding the button. Press the button three times to start it.
Can you charge the Seahorse Pro Plus while using it?
Yes. Lookah lists pass-through charging, so you can use the Seahorse Pro Plus while it is plugged in by USB-C. Charge it with the included USB-C cable and a standard adapter, and unplug it once it is full.
How often should you replace the Seahorse coil?
Replace the coil when flavor drops, the tip stays dirty after an extra heat cycle and brushing, or it heats unevenly. How long that takes depends on how often you use it and how well you clean it. Running a clean-up heat cycle after each session helps coils last longer.
100% Authentic from top brand names
Shop nectar collectors
Free US shipping over $49.99, $9.99 flat under that. Ships within the USA to adults 21+.
Master your Seahorse
Five presses to start, two for voltage, three for session mode, and a clean-up cycle after every use. Compare the whole lineup in our Lookah collection or browse more dab pens.
