Vaporizers · Glass · Grinders · Accessories · Shop the full Superstrain collection

Dr. Dabber Switch 2 vs Boost Evo: What Replaced the Boost Evo?

Listen to this article

0:00

Dr. Dabber Switch 2 e-rig with a quartz insert and Drop loading tool

The Dr. Dabber Switch 2 is the device to buy today. The Boost Evo is no longer listed on Dr. Dabber’s store, while the Switch 2 is the brand’s current flagship e-rig. The Switch 2 uses induction heating with an infrared sensor, a 20mm quartz insert, a 250°F to 650°F range and up to 30 heating cycles per charge. The Boost Evo used a sensor-equipped quartz eChamber, six heat presets and roughly 40 to 60 cycles per charge, according to Dr. Dabber’s support pages.

Key takeaways

  • The Boost Evo no longer appears on Dr. Dabber’s store. The Switch 2 is the current flagship.
  • Switch 2: induction heating, an infrared sensor and a large 20mm quartz insert, per Dr. Dabber.
  • Boost Evo: an eChamber heater with a built in temperature sensor and six color coded presets.
  • Switch 2 adds app control with Descent, Ascent and Steady heat modes.
  • Boost Evo eChambers are wear parts that Dr. Dabber says last about 4 to 12 months.

What happened to the Boost Evo?

The Boost Evo was one of the most popular portable e-rigs Dr. Dabber made. It paired a compact body with a quartz eChamber, a glass water attachment and simple color coded heat settings. Today the product page no longer appears on Dr. Dabber‘s store, although replacement parts like eChambers and loading tools are still sold.

If you own a Boost Evo, it still works and parts remain available. If you are shopping for a new device, the Switch 2 is the one Dr. Dabber now puts front and center, and it is the one we carry.

Switch 2 vs Boost Evo specs

SpecSwitch 2Boost Evo
HeatingInduction with infrared sensoreChamber with built in temperature sensor
Heat control250°F to 650°F, plus app control6 presets labeled 500°F to 750°F
Heat modesDescent, Ascent and SteadySingle profile per preset
Heat up5 to 20 secondsAbout 11 seconds
Cycles per chargeUp to 30About 40 to 60
ChargingUSB-C pass-through, 60 to 90 minutesUSB-C pass-through, about 1 hour
Wear part20mm quartz insertQuartz or sapphire eChamber, about 4 to 12 months
Warranty2 years on electronics1 year, eChambers excluded
Size9 in tall, 25.6 ozCompact portable
Switch 2 from drdabber.com product specs. Boost Evo from Dr. Dabber’s Boost Evo knowledge base. Each brand page labels temperatures its own way, so compare them as a guide.
Dr. Dabber Switch 2 with the glass removed showing the quartz insert

The current flagship

Shop the Dr. Dabber Switch 2

Induction heating, IR sensor and a 20mm quartz insert. 100% Authentic from top brand names.

How is the heating different?

This is the biggest change between the two. The Boost Evo heats through an eChamber, a self contained part with the heating element and a temperature sensor built in. It works well, but the eChamber is a wear part. Dr. Dabber lists a lifespan of about 4 to 12 months depending on use, and eChambers are not covered by the warranty.

The Switch 2 uses induction instead. Dr. Dabber says it heats the insert evenly from the sidewalls and base at the same rate, and its infrared sensor reads the temperature directly. Because there is no atomizer coil, the main part you maintain is the quartz insert itself, which you can upgrade to a Sapphire or Sapphire Plus insert.

Which gives you more control?

The Boost Evo keeps things simple: six color coded presets, cycled with three clicks, and a choice of 20 or 40 second hold times. The Switch 2 goes much further. Its app gives you full control over temperature, hold time, lighting and the three Dynamic Heat Modes. Descent starts hot and falls off like a traditional banger, Ascent starts low and builds, and Steady holds one temperature.

Dr. Dabber Switch 2 next to the smaller Switch GO

Which one should you choose?

  • Buying new: choose the Switch 2. It is Dr. Dabber’s current flagship, has the longer warranty and the most control.
  • Already own a Boost Evo: keep using it. Replace the eChamber when flavor fades or heat becomes inconsistent.
  • Want something smaller: look at the Switch GO, a 6 inch, 12.8 oz e-rig with the same 250°F to 650°F range, per Dr. Dabber.
  • Want pocket size: the Ghost 2 is a 3.5 inch portable.

How do you get started with the Switch 2?

  1. Charge the Switch 2 fully with the included USB-C cable and adapter.
  2. Fill the glass attachment with water until the inner perc is just covered.
  3. Choose a temperature and heat mode on the device or in the app. Start on the lower end.
  4. Load a small amount of concentrate into the quartz insert with the included Drop heated loading tool.
  5. Start the cycle, cap it with the carb cap and inhale slowly.
  6. Swab the insert while it is still warm after each session.

Smaller e-rig

Shop the Switch GO

250°F to 650°F in a 6 inch body. Free US shipping over $49.99.

Boost Evo owner tips

If you are keeping your Boost Evo, a few habits from Dr. Dabber’s own guidance help it last. Load small amounts, about the size of a grain of rice. Stay at or below the green 650 setting unless you are using a larger load. Recalibrate any new eChamber before first use, and charge with a phone adapter or computer port, since high wattage laptop chargers will not charge it. We still carry the Boost Evo loading tool.

What carries over from the Boost Evo?

If you liked the Boost Evo, much of what made it good is still here. Both devices are torch free e-rigs built around quartz, both charge over USB-C with pass-through charging so you can use them while plugged in, and both use water filtration through a glass attachment. The loading habits are the same too: small loads, a warm swab after each session and the lowest temperature that gives you the vapor you want.

The difference is in the details. The Switch 2 replaces the eChamber with induction heating and a direct infrared reading, gives you a bigger insert and adds app based control. For most people coming from a Boost Evo, the learning curve is short and the upgrade is noticeable from the first session.

Whichever device you use, buy replacement inserts and eChambers from a trusted shop so you know they are genuine and fit correctly. Counterfeit parts are a common cause of uneven heating and short lifespans.

Shop Dr. Dabber we carry

In stock now and ready to ship. Free US shipping over $49.99.

Frequently asked questions

Is the Dr. Dabber Boost Evo discontinued?

The Boost Evo no longer appears on Dr. Dabber’s store, though replacement parts are still sold. The Switch 2 is the brand’s current flagship e-rig.

Is the Switch 2 better than the Boost Evo?

For most buyers, yes. The Switch 2 adds induction heating, an infrared sensor, app control with three heat modes and a 2 year warranty on electronics, according to Dr. Dabber.

Which lasts longer on a charge?

Dr. Dabber lists about 40 to 60 cycles for the Boost Evo and up to 30 heating cycles for the Switch 2. The Switch 2 trades some cycles for its larger insert and induction heater.

How long does a Boost Evo eChamber last?

Dr. Dabber estimates about 4 to 12 months depending on how often you use it. eChambers are not covered under warranty.

Does the Switch 2 need the app?

No. You can run it from the device, but the app unlocks full control over temperature, hold times, lighting and heat modes.

See the lineup

Shop Dr. Dabber

Switch 2, Switch GO, Ghost 2 and accessories. Ships within the USA to adults 21+.

The bottom line

The Boost Evo earned its reputation, but the Switch 2 is where Dr. Dabber has moved. If you are buying today, the Switch 2 gives you better heating, more control and a longer warranty. Compare every model in our e-rig collection.

Blake Brown

Written by

Blake Brown is a web developer and copywriter who has worked in the alternative products sector since 2011. He builds and maintains the Superstrain store and writes for it. Years of working with vaporizers, cartridge batteries, glass and accessories, and with the brands that make them, shape how he explains hardware: plainly, with attention to setup, everyday use and upkeep. He writes for shoppers who want clear answers before they buy.

More from Blake →

From the blog

Latest articles